Updated November 2026

Growing tomatoes up string is one of the simplest ways to keep indeterminate vines upright, improve airflow and make harvesting easier. In this guide you will set up a sturdy string system, train your plants as they grow, and avoid the problems that cause most string-trained tomatoes to fail. Expect a tidy, productive plant that yields fruit well into the season.

What You Need Before You Start

Gather your materials before the seedlings go in the ground. Growing tomatoes up string works best when the overhead support is anchored firmly, because a mature indeterminate plant can carry 20 pounds or more of fruit and foliage.

Shopping for one? See our guide: 3 Best Hanging Containers for Growing Tomatoes in Hanging Containers (2026).

  1. Twine rated for garden use, such as sisal or jute, or a heavier polypropylene cord if you expect strong winds.
  2. An overhead support: a horizontal wire or sturdy bar at least 6 to 7 feet high, or a sturdy overhead beam.
  3. Soft plant ties or strips of old nylon stocking for tying stems without cutting into them.
  4. Stakes or eye hooks for anchoring the base of each string.
  5. Pruning snips for removing suckers.

Setting Up the String Supports

Install the overhead support before planting or within the first week after transplanting, so you do not disturb the roots later. Place each plant about 18 to 24 inches from its neighbors, and run a string from the base of each plant straight up to the overhead wire. Tie the bottom end around the base of the plant or to a small stake, leaving a few inches of slack so the stem can thicken without strangling.

For a single-stem system, attach the string directly at the base of the plant. Many gardeners also use a double-stem approach, which you will learn more about in the pruning section below. Whichever you choose, make sure the string is taut enough to hold the plant upright but not so tight that it pulls the base out of the soil.

Training and Tying the Vines

As the plant grows, wrap the main stem around the string as it rises. Most indeterminate varieties grow about 2 to 3 feet per month in good conditions, so check the plant weekly during peak growth. Use soft ties every 8 to 12 inches to secure the stem to the string, and tie just below a leaf node so the tie does not slip. If you want more background, see Growing Tomatoes Yellow Leaves: 6 Causes and Fixes That Work.

Guide the stem in one direction rather than letting it wind back and forth. Twisting the string can create tangles and make pruning harder later. If a branch grows sideways, gently redirect it toward the string instead of forcing it.

Watering and Mulching Around String-Trained Plants

Water at the base of the plant, not over the foliage, to reduce disease. A 2 to 3 inch layer of straw or shredded leaves helps hold moisture and keeps soil from splashing onto lower leaves. For more on how soil conditions support strong stems, see Preparing Soil for Growing Tomatoes: A Step-by-Step Guide for Beginners.

Pruning for Strong, Productive Plants

String systems pair well with selective pruning. Remove suckers, the shoots that grow in the leaf axils, when they are 2 to 4 inches long. Keep one or two main stems if you want a compact plant, or allow a second leader for a fuller plant with more fruit. Remove lower leaves that touch the soil to reduce soil-borne disease. Avoid stripping too much foliage at once, since the leaves feed the developing fruit.

If you are unsure whether your plant is ready for heavier pruning, check how it responds over two or three weeks. Stress from over-pruning can slow fruit set, which is covered in Tomatoes Not Growing Fruit: 7 Causes and Fixes That Work.

Common Mistakes to Avoid

  • Tying too tightly, which can girdle the stem as it thickens.
  • Installing the overhead support after the plant is large, which damages roots and foliage.
  • Letting the vine wind around the string in both directions, which tangles growth.
  • Using thin string that snaps under the weight of a loaded plant.
  • Leaving suckers unchecked, which crowds the plant and reduces airflow.

Sisal twine is a traditional choice for string-trained tomatoes because it grips well and biodegrades at season’s end. View on Amazon

Soft plant ties make it easier to secure stems without damaging them as they thicken. View on Amazon

A sturdy overhead wire or support system holds the strings in place through wind and heavy fruit loads. View on Amazon

FAQ

How tall should the overhead support be?

Plan for at least 6 to 7 feet so the plant has room to grow through the season. Indeterminate varieties can exceed 8 feet, so a taller support gives you more flexibility.

Can I use one string per plant?

Yes. One string per plant is the standard method and keeps each vine supported independently. Run separate strings from each plant to the overhead wire.

How often should I re-tie the stems?

Check and re-tie every one to two weeks during fast growth. Re-tie any loose ties as the stem thickens, and move ties down or up as needed.

Conclusion

Growing tomatoes up string takes a little setup, but it gives you a well-ventilated, easy-to-harvest plant. Install your supports early, tie gently, and prune with care. With these habits, your vines should stay upright and productive through the season.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our vegetable & edible gardening guides, checking product details against manufacturer specifications and owner feedback.