Updated November 2026
Growing tomatoes vertically with string is one of the simplest ways to get a taller, healthier plant in a small space. You anchor a strong line above the plant, wrap the stem as it grows, and prune it to a single or double main leader. Done right, the vines stay upright, the fruit ripens off the soil, and airflow improves enough to cut down on disease.
What You Need Before You Start
Use a string or twine that will not stretch or break under the weight of a vine loaded with fruit. Natural jute or sisal twine works well, and so does a polypropylene garden twine. Thin cotton string can rot or snap by midsummer. Plan on one line per plant, running from the base of the plant to an overhead support such as a horizontal wire, a deck rail, or a sturdy beam.
Shopping for one? See our guide: 3 Best Hanging Containers for Growing Tomatoes in Hanging Containers (2026).
- Garden twine or jute string, roughly 8 to 10 feet per plant
- A sharp pair of pruners or scissors
- Soft plant ties or strips of old cloth for securing the stem
- A screw eye, hook, or cross-bar for the top anchor
- Stakes or a wall to hold the bottom of the line
Step 1: Set Up Your Anchor Points
Install the top anchor first, at least 7 to 8 feet above the soil, so the vine has room to climb. Tie the string to the anchor and run the other end down to the base of the plant. At the bottom, tie it to a small stake pushed into the soil about 4 to 6 inches from the stem, or to a hook at the base of the container. Keep the line taut but not tight enough to pull the stem.
Step 2: Train the Plant to the String
Once the seedling reaches about 8 to 12 inches tall, begin tying it to the string. Loop the twine around the stem and pair it with a soft tie, then secure it using a figure-eight wrap so the twine does not slip. Tuck the tie just below a leaf node rather than directly against the stem, since that spot tends to rub and damage the plant. Repeat every 10 to 12 inches as the vine grows.
Coiling Versus Tying
Indeterminate varieties are the ones that keep growing until frost, and they respond best to a single-leader system. Determinate types stop at a set height and need only light support, so you can tie them at a few points instead of continuously. Some growers prefer to wrap the string around the stem and let the plant coil naturally, but that method can strangle thin stems, so check it weekly.
Step 3: Prune for a Single Leader
Pinch out suckers, the small shoots that form in the leaf axils, when they are 2 to 3 inches long. Leaving them creates a bushy plant that is hard to tie and more crowded. Keeping one main stem, or at most two, concentrates energy into fruit. Remove lower leaves that touch the soil, and cut off any foliage that drops below the lowest truss once fruit begins to set.
Step 4: Maintain the Setup Through the Season
Check ties every week or two, especially after heavy rain or wind. Loosen any tie that is cutting into the stem, and re-tie as the plant lengthens. Keep the top anchor secure and the line free of kinks. As fruit ripens, support heavy clusters with a small sling of cloth if they pull the stem sideways.
Common Mistakes
- Using string that stretches or rots, which lets the vine collapse midseason.
- Tying too tightly, which constricts the stem and invites breakage.
- Letting suckers grow unchecked, leading to a tangled, shaded plant.
- Installing the anchor too low, so the vine runs out of room before harvest.
- Forgetting to check ties after storms, which can snap a loose vine.
Recommended Gear
A reliable twine keeps the main line from failing under load, and a set of soft plant ties makes re-tying quick and gentle on stems. Choose a heavy-duty garden twine for the vertical run and pair it with plant ties sized for tomato stems. A related read: Growing Tomatoes Up String: A Step-by-Step Guide for Beginners.
- Garden twine: Sturdy, low-stretch line that holds up outdoors. View on Amazon
- Soft plant ties: Padded or cloth-style ties that protect stems from rubbing. View on Amazon
- Pruning shears: Clean cuts make suckering faster and reduce disease risk. View on Amazon
FAQ
What is the best string for growing tomatoes vertically?
A strong, low-stretch garden twine such as jute or polypropylene works best. It holds the weight of a heavy vine through the season without breaking down.
How high should the string be for tomatoes?
Aim for an overhead anchor 7 to 8 feet high for indeterminate varieties. Determinate types need less height, but the line should still be long enough for the plant to reach its full size.
Should I remove suckers when training tomatoes on string?
Yes, for most indeterminate varieties. Pinch suckers when they are 2 to 3 inches long to keep one or two main stems, which makes the plant easier to tie and improves fruit production.
Conclusion
Growing tomatoes vertically with string keeps plants upright, clean, and easier to manage in tight spaces. Set a strong anchor, tie the stem as it grows, and prune to a single leader for the best results. For soil and container advice that pairs well with this method, see Preparing Soil for Growing Tomatoes: A Step-by-Step Guide for Beginners and Tips for Growing Tomatoes in Containers: 8 Steps for Bigger Harvests.
