Updated November 2026

Tomatoes growing inside itself means a smaller fruit or seed cluster develops within a larger tomato, often because the plant received uneven growing conditions. This guide explains what causes the problem, how to tell whether your fruit is affected, and what you can change to get cleaner, more uniform harvests next season.

What Tomatoes Growing Inside Itself Looks Like

When a tomato grows inside itself, you usually see a small, hard, or partly formed fruit nested in the center of a larger one. Sometimes the inner fruit is green and firm, and sometimes it is a cluster of seeds with a thin skin around it. The outer tomato may look normal from the outside, or it may show a slight bulge or ridge where the inner growth presses against the wall. We also found Pictures of Tomatoes Growing: What Each Stage Looks Like useful on this point.

Shopping for one? See our guide: 3 Best Hanging Containers for Growing Tomatoes in Hanging Containers (2026).

This is not the same as a tomato splitting. Splitting shows as cracks on the skin. Internal growth stays hidden until you cut the fruit open.

Why It Happens

The most common cause is a disruption in the flower or early fruit development. Tomato flowers that are pollinated irregularly, or that experience a stretch of temperature stress, can produce fruit where the internal tissue keeps dividing after the normal growth pattern has stopped. Several conditions raise the odds:

  • Temperature swings. Days above 90°F or nights below 55°F during flowering increase irregular fruit set.
  • Irregular watering. Going from dry soil to heavy watering in a short period causes rapid, uneven expansion.
  • Excess nitrogen. Too much nitrogen pushes vigorous leaf growth and can disrupt fruit development.
  • Poor pollination. Low humidity, lack of wind, or limited pollinators can lead to partial or abnormal seed development.

Some varieties, particularly large beefsteak types, are more prone to internal irregularities than small determinate or cherry types.

How to Prevent It Next Season

Prevention focuses on keeping the plant steady from flowering through fruit set. The goal is consistent conditions rather than perfect ones.

Step 1: Water on a schedule

Give plants about 1 to 1.5 inches of water per week, delivered at the base of the plant. Mulch with 2 to 3 inches of straw or shredded leaves to keep soil moisture even. Avoid letting the soil dry out completely and then flooding it.

Step 2: Feed with balanced nutrition

Use a fertilizer with moderate nitrogen and higher phosphorus and potassium once plants start flowering. Soil tests can show what your bed already contains. Our guide on Nutrients for Growing Tomatoes: A Step-by-Step Guide for Beginners covers how to match feeding to each growth stage.

Step 3: Support pollination

Gently shake flowering plants each morning or tap the stems so pollen releases. For indoor or caged plants, a small electric toothbrush held against the flower cluster works well. Good air movement helps as well.

Step 4: Protect plants from extreme heat and cold

Shade cloth rated around 30 percent can reduce heat stress during hot spells. In spring and fall, row covers help hold warmth overnight. Choosing the right container size also matters, since small pots heat up and dry out fast. See What Size Container for Growing Tomatoes? A Guide to Pot Volume (2026) for sizing details.

Checking Your Harvest

If you suspect internal growth, cut a few fruits open after they ripen. Note the variety, the date the flower opened, and the weather that week. Patterns over several fruits will show you whether the issue comes from one hot spell or from an ongoing watering or feeding problem. If fruit regularly cracks alongside internal growth, that points to uneven water, and Why Do Tomatoes Split When Growing? Causes and How to Prevent It explains that problem in more detail.

Common Mistakes

  • Fertilizing heavily with high-nitrogen products after the plant has started to set fruit.
  • Watering heavily after a long dry spell instead of moving toward steady moisture.
  • Assuming every oddly shaped fruit has internal growth. Some irregular shapes are simply genetic.
  • Ignoring pollination, especially in greenhouses, covered beds, or during humid stretches.
  • Changing several variables at once, which makes it hard to know what worked.

A soil moisture meter helps you track whether your watering schedule is steady. Search for View on Amazon.

Shade cloth limits heat stress during summer peaks. Search for View on Amazon.

A small electric toothbrush can be used to vibrate flower clusters and improve pollination. Search for View on Amazon.

FAQ

Is a tomato with something growing inside it safe to eat?

In most cases, yes. The internal growth is plant tissue and seed, and it is typically edible. Cut away any discolored or spoiled areas and check that the rest of the fruit looks normal. If you are unsure, consult your local extension office.

Can I fix an affected plant mid-season?

You cannot undo damage to fruit already forming, but you can stabilize watering, feeding, and temperature for the remaining flowers. New fruit often comes out cleaner once conditions settle.

Does the variety affect the risk?

Yes. Large beefsteak and heirloom types tend to show internal irregularities more often than compact determinate or cherry varieties.

Conclusion

Tomatoes growing inside itself usually trace back to uneven temperature, water, feeding, or pollination during flowering. Steady conditions and gentle pollination support clean fruit set. Track what you change each season so you can see which adjustments make the biggest difference.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our vegetable & edible gardening guides, checking product details against manufacturer specifications and owner feedback.