Updated November 2026

Growing tomatoes on a string is a simple way to keep indeterminate tomato vines upright, off the ground and easy to reach. You hang a strong line from an overhead support, anchor it at the base of the plant, and train the vine up as it grows. Done well, this method gives you cleaner fruit, better airflow and fewer problems with soil-borne disease.

What You Need Before You Start

Choose a support point at least 6 to 8 feet high, such as a sturdy horizontal bar, a porch beam or a metal frame. Use a string or twine rated for outdoor use and strong enough to hold a loaded plant. Plan for one string per plant, placed about 18 to 24 inches from the next.

Shopping for one? See our guide: 3 Best Hanging Containers for Growing Tomatoes in Hanging Containers (2026).

  • Outdoor twine or polypropylene string, at least 1/8 inch thick
  • Clips, hooks or a loop of cord for the overhead anchor
  • A small stake or ground anchor for the bottom
  • Soft plant ties or strips of fabric for attaching the vine
  • Scissors and a pair of pruners

Step-by-Step Setup

1. Install the overhead support

Secure the top end of each string before planting. Tie it firmly to the bar or beam, or run it through a screw eye. Test the tension by pulling down gently. The line should not sag when a mature plant hangs from it.

2. Anchor the bottom

Tie the other end to a stake or a loop around the base of the plant, about 2 to 3 inches from the stem. Some gardeners wrap the string around the root ball or tuck it under a bit of mulch, but a loop near the base is easier to adjust later. Avoid tying it tightly around the stem itself.

3. Plant and set the vine

Plant your seedling deep, burying the lower stem so roots form along it. Once planted, wind the main stem gently around the string or tie it with a soft tie about every 8 to 12 inches as it grows. Keep one main leader per plant.

Training and Maintaining the Vine

Tomatoes on a string need steady attention through the season. Remove suckers, the shoots that form in the leaf axils, when they are small, aiming to keep one or two main stems. Pinching them off by hand is faster than cutting. Check ties weekly, since stems thicken quickly and can girdle the stem if left too tight.

When the plant reaches the top of the string, you can lower the vine by unwinding it and wrapping the lower portion around the string again. This keeps it productive in a long season and avoids leaning. Water at the base in the morning, and mulch to reduce soil splash onto leaves.

Tools and Supplies Comparison

Support component Best use Main consideration
Polypropylene twine Overhead lines Strong and UV-resistant when labeled for outdoor use
Cotton garden twine Soft ties Breaks down over time, so check it regularly
Fabric strips Stem attachment Gentle on stems and easy to re-tie
Metal clips Top anchoring Hold tension well but can slip if poorly fitted

Common Mistakes

  • Using string that is too thin or not rated for outdoor loads, which can snap under a heavy fruit load.
  • Tying the stem too tightly, causing constriction that damages the vine as it thickens.
  • Letting too many suckers develop, which splits energy and crowds the plant.
  • Forgetting to lower the vine when it reaches the top, leaving it stretched and unstable.
  • Setting the string anchor too far from the base, so the plant leans away from its support.

A reliable outdoor twine makes the overhead line last through the season. View on Amazon

Soft plant ties let you adjust the vine without cutting into the stem. View on Amazon

A small set of pruners helps you remove suckers cleanly and quickly. View on Amazon

If you are still deciding on your setup, Tips for Growing Tomatoes in Containers: 8 Steps for Bigger Harvests covers related container considerations, and Preparing Soil for Growing Tomatoes: A Step-by-Step Guide for Beginners explains how to prepare the bed before planting. For a deeper look, Growing Tomatoes Up String: A Step-by-Step Guide for Beginners covers this in detail.

FAQ

How high should the string be for tomatoes?

Aim for a support at least 6 to 8 feet high so indeterminate varieties have room to grow. Lower the vine once it reaches the top to keep the plant manageable.

Can I use one string for two plants?

It is better to use one string per plant. Sharing a line can cause the vines to tangle and compete for light and airflow.

How often should I re-tie the vine?

Check ties about once a week during active growth. Loosen any tie that looks tight, since stems thicken quickly in warm weather.

Conclusion

Growing tomatoes on a string takes a little setup but rewards you with tidy, productive plants. Secure a strong overhead line, anchor the base, and train the vine as it grows. A few minutes each week keeps your tomatoes healthy from planting to harvest.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our vegetable & edible gardening guides, checking product details against manufacturer specifications and owner feedback.