Updated November 2026
Raised bed garden netting protects your vegetables from birds, squirrels, rabbits and many insects while still letting sun, water and air reach your plants. In this guide you will learn how to pick the right mesh size, build a simple support frame, and fit netting so it stays secure through wind and rain. The steps below work for most standard raised beds, whether you grow tomatoes, lettuce or brassicas.
Choose the Right Netting Material and Mesh Size
Mesh size matters more than most gardeners expect. A mesh of about 1/2 inch will stop most birds and small insects, while a 1/4 inch or finer mesh is needed to exclude flea beetles, cabbage moths and other small pests. For larger animals like rabbits and squirrels, a sturdier mesh with openings of about 1 inch or less works better, since small mesh is harder for animals to chew through.
Shopping for one? See our guide: 5 Best Garden Soil in Bulks for Raised Beds and Gardens (2026).
Polypropylene and polyethylene netting are common choices because they resist UV damage and do not rot. Look for UV-stabilized material, which manufacturers typically specify for outdoor use, and avoid thin fishing-style nets that tear easily. Lightweight row cover fabric is a separate option that blocks insects but lets more light through; it is not a substitute for netting when birds are the main problem.
If you are still deciding how to set up the bed itself, Raised Garden Beds: Sizes, Materials and Setup covers dimensions and materials that affect how you will mount the frame.
Build a Frame That Keeps the Netting Off Your Plants
Netting that rests directly on plants can bruise foliage, trap heat and let pests crawl underneath. A frame lifts the mesh and gives you a clear working space. Use hoops of 1/2-inch PVC or flexible conduit, or simple wooden stakes linked by a top rail, spaced every 3 to 4 feet along the length of the bed. For a bed that is 4 feet wide, a hoop about 30 inches high gives comfortable clearance for most vegetables; taller crops like pole beans or indeterminate tomatoes may need more height. A related read: Raised Garden Design Layout: 6 Steps to Plan Beds That Work.
Secure the frame by pushing hoops into the soil at least 8 inches deep or by fixing them to the bed sides with brackets. In windy locations, add a cross brace at the top.
Install the Netting Step by Step
- Measure the bed length and width, then add 12 inches of extra netting on each side so it can be anchored to the bed edges.
- Set the frame hoops or stakes and check that the top rail is level.
- Drape the netting over the frame, pulling it taut so it does not sag or touch the plants.
- Anchor the netting to the bed sides with landscape staples, heavy-duty clips or a row of untreated wood strips nailed along the edge.
- Bury or weigh down the lower edge with soil, stones or a 2-inch-deep trench so animals cannot slip underneath.
- Leave a gap or zipper section at one end so you can reach in for weeding, watering and harvesting.
Maintain the Netting Through the Season
Check the netting weekly for tears, loose edges and gaps where animals have pushed through. Bees and pollinators can be blocked once flowers open, so for crops like squash, cucumbers and beans, you may need to lift the netting during the hours when pollinators are most active, or hand-pollinate. Remove netting once plants reach the top of the frame or when pest pressure drops late in the season. Wash the mesh with mild soapy water at season’s end, let it dry fully and store it out of direct sun. A related read: Block for Raised Garden Bed: How to Choose and Build Sturdy Vegetable Beds.
Common Mistakes to Avoid
- Using mesh that is too large for the pest you are trying to stop, especially for insects.
- Letting the netting touch leaves, which can damage plants and allow pests to crawl through.
- Leaving gaps at the bottom edge where rabbits and squirrels can enter.
- Skipping the frame on windy sites, so the netting tears or wraps around plants.
- Forgetting that pollinators need access to flowering crops.
Recommended gear
Insect and bird netting in a UV-stabilized polypropylene mesh is the most useful single item, since it handles both pests and weather. View on Amazon
Flexible garden hoops or PVC hoop kits make it easy to build a frame that clears the plants without much cutting. View on Amazon
Landscape staples or heavy-duty garden pins hold the netting edges firmly to the bed and keep animals from lifting it. View on Amazon
FAQ
What size mesh should I use to keep birds out of a raised bed?
A mesh opening of about 1/2 inch is generally effective against most birds. For smaller birds or insects, choose a finer mesh.
Can netting go directly on top of the plants?
It is better to use a frame so the netting does not touch leaves. Direct contact can damage plants and create gaps for pests.
How do I stop rabbits and squirrels from getting under the netting?
Anchor the bottom edge firmly with soil, stones or a shallow trench, and check the edges regularly for lifted or gnawed sections. Consult your local extension office for guidance on wildlife problems in your area.
Conclusion
Good raised bed garden netting starts with the right mesh size, a sturdy frame that keeps the fabric off your plants, and secure anchoring along every edge. Check it often, lift it when pollinators need access, and clean and store it well at season’s end. With these steps, your vegetables can grow largely undisturbed from planting to harvest.
